New Products and Announcements

Automatic 30 Ton XRF Pelletizing Presses

Two fast, easy-to-use and effective XRF Pellet Presses are available. All operations controlled by two momentary button switches. Analog gauge indicates both force and pressure in one ton and 50 PSI increments, respectively. Lighted interior working chamber is standard and available on some models. Compact for countertop installation.

Model 4325 accommodates, self-centers and cradles different optionally available dies to produce 32, 35, 40 and 47 mm diameter pellets. Spindle with knurled knob effects finer adjustments and used to eject sample briquette in a collection cup from the die.

Model 4335 integrates a die of choice for producing 32, 35 or 40 mm diameter sample pellets. Completely eliminates traditional die handling for briquetting and pellet removal. Use PelletCups® to contain samples to eliminate inadvertent spillage and for easy clean-ups. Ideal for briquetting same size samples.

XRF SAMPLE CUPS HAVE INTEGRATED THIN-FILM TRIMMERS

The troublesome procedure of trimming away extraneous thin-film is completely averted by using sample cups integrated with a trimming feature. Annoying thin-film clippings that tend to statically cling to everything are no longer an issue by using “Snap-On Ring” Thin-Film Assembly XRF Sample Cups. Simply tear away the thin-film from the assembled sample cup; trimming is close up to the cell.

Also, for users of Microporous Film with the 1500 Series XRF Sample Cups the NEW Integrated Thin-Film Trimmer will prove to be invaluable in trimming away the excess material.

XRF SAMPLE CUPS HAVE INTERNAL OVERFLOW RESERVOIRS

Conventional XRF Sample Cups equipped with overflow reservoirs are generally on the exterior tops. This may tend to inadvertently overflow into the sample chamber during analysis of thermally sensitive sample solutions or through handling. Now, the NEW 2100 Series XRF Sample Cups have internal Overflow Reservoirs. Any extraneous sample solutions collect within the sample cup completely eliminating spillages and clean up of the sample chamber. The Internal Overflow Reservoir also serves as a fill limit in introducing the sample into the sample cup.

XRF SAMPLE CUPS FOR HORIBA SLFA-20 MODELS

The Trimless 1000 Series XRF Sample Cups have been increased for accommodation by the Horiba SLFA 20 instruments and other Horiba single sample analyzers newer than SLFA-920 series. This NEW XRF Sample Cup is designated Cat. No. 1083.

NEW ETNOM™ THIN-FILM IS WIDELY ACCEPTED

The recent introduction of Etnom™, a NEW Thin-Film Sample Support Material, has been widely acclaimed and accepted as choice for analyzing aliphatic and aromatic hydrocarbons, particularly diesel fuel and gasoline. The substance is noteworthy for its chemical and softening resistance and increase in intensities especially for the long wavelength (lower KeV energy) spectral lines. Etnom is available in SpectroMembrane® Sample Support Carrier Frames for convenience in handling, avoidance of troublesome static electrical charges and cross contamination issues.