CONTINUOUS ROLL AND PRECUT CIRCLE WINDOWS
Thin-Film Windows are available in Continuous Rolls, Pre-Cut Circles and SpectroMembrane® Pre-Mounted Carrier Frames. All thin-film manufacturing procedures are performed and inventoried in a environmentally safe room where the temperature and pressure are controlled to avoid inadvertent contamination and ensure the integrity of the products. They are also packaged and additionally protected by individually plastic wrapping immediately after production.
Specifications and Ordering Information
Continuous Rolls: (3” wide x 300’ long; 7.6cm x 91.4 m); Serrated Cutting Edge Boxes
| CATALOG NUMBER | THIN-FILM SUBSTANCE | GAUGE |
|---|---|---|
| 090 | Ultra-Polyester | 1.5 μ; 0.00006”; 0.06mil; 0.00152mm |
| 100 | Mylar®; Hostaphan® | 2.5 μ; 0.00010”; 0.10 mil;0.00254mm |
| 150 | Mylar®; Hostaphan® | 3.6 μ; 0.00014”; 0.14 mil; 0.00356mm |
| 250 | Mylar®; Hostaphan® | 6.0 μ; 0.00024”; 0.24 mil; 0.00610mm |
| 416 | Prolene® | 4.0 μ; 0.00016”; 0.16 mil; 0.00406mm |
| 425 | Polypropylene | 6.0 μ; 0.00024”; 0.24 mil; 0.00610mm |
| 440 | Polyimide (Kapton®) | 7.5 μ; 0.00030”; 0.30 mil; 0.00762mm |
| 442* | Polyimide (Kapton®) | 7.5 μ; 0.00030”; 0.30 mil; 0.00762mm |
| 475 | Polypropylene | 12.0 μ; 0.00050”; 0.50 mil; 0.0127mm |
Supplied in 50’ (15.2m) lengths
PRECUT 2.5" (63.5 mm) DIAMETER CIRCLES (500 pieces/box)
| CATALOG NUMBER | THIN-FILM SUBSTANCE | GAUGE |
|---|---|---|
| 106 | Mylar®; Hostaphan® | 2.5 μ; 0.00010”; 0.10 mil; 0.00254mm |
| 156 | Mylar®; Hostaphan® | 3.6 μ; 0.00014”; 0.14 mil; 0.00356mm |
| 256 | Mylar®; Hostaphan® | 6.0 μ; 0.00024”; 0.24 mil; 0.00610mm |
| 426 | Prolene® | 4.0 μ; 0.00016”; 0.16 mil; 0.00406mm |
| 436 | Polypropylene | 6.0 μ; 0.00024”; 0.24 mil; 0.00610mm |
| 446 | Polyimide (Kapton®) | 7.5 μ; 0.00030”; 0.30 mil; 0.00762mm |
| 476 | Polypropylene | 12.0 μ; 0.00050”; 0.50 mil; 0.0127mm |
Precut Circles: (1000 pieces/box) (2.5” Diameter; 63.5mm)
| CATALOG NUMBER | THIN-FILM SUBSTANCE | GAUGE |
|---|---|---|
| 107 | Mylar®; Hostaphan® | 2.5 μ; 0.00010”; 0.10 mil; 0.00254mm |
| 157 | Mylar®; Hostaphan® | 3.6 μ; 0.00014”; 0.14 mil; 0.00356mm |
| 257 | Mylar®; Hostaphan® | 6.0 μ; 0.00024”; 0.24 mil; 0.00610mm |
| 427 | Prolene® | 4.0 μ; 0.00016”; 0.16 mil; 0.00406mm |
| 437 | Polypropylene | 6.0 μ; 0.00024”; 0.24 mil; 0.00610mm |
| 447 | Polyimide (Kapton®) | 7.5 μ; 0.00030”; 0.30 mil; 0.00762mm |
| 477 | Polypropylene | 12.0 μ; 0.00050”; 0.50 mil; 0.0127mm |
NOTE: Ultra polyester, Mylar, polypropylene, Prolene and polycarbonate are “unsuitable for
analyzing sulfur in diesel fuel, gasoline and other petroleum products containing aromatics”; ASTM D-4294-03 and ASTM D-6445-99 (2004) and
other independent testing. Refer to Etnom SpectroMembrane Thin-Film Carrier Frames for information regarding exceptional chemical
resistance and higher % Transmission Values.
IMPORTANT: The possibility of pinholes, pores and variations existing in any thin-film sample support substance regardless of form and packaging may present leakage of a sample with subsequent contamination and damage to the analytical instrumentation and its components. It is strongly recommended that each item used be subject to judicious testing, use and applications and evaluation prior to actual use. The responsibility of acceptance and safety resides totally with the user. Chemplex Industries, Inc. assumes no liability or guarantee that thin-film sample supports will perform in accordance with its suggested use.
Prolene® is a registered trademark of Chemplex Industries, Inc.
Etnom™ is a trademark of Chemplex Industries, Inc.
Mylar® and Kapton® are registered trademark s of E.I. Dupont de Nemours
Hostaphan® is a registered trademark of Mitsubishi Films